Need a TV mounted or a stack of flat-pack furniture assembled in Santa Rosa Beach? That is everyday work for 30A Home Fixology, the locally owned, licensed and insured handyman crew that handles TV mounting and furniture assembly all along Scenic 30A and South Walton. A flat-screen hung crooked, or one that works loose from the wall a few months later, is not the look you want in a 30A living room. Mounting a TV right comes down to three things most people underestimate: finding solid structure behind the finish, choosing the correct anchor for that exact wall, and hiding the cords so the whole thing looks built in. We handle all three in one visit, and we assemble the flat-pack furniture stacked in your garage while we are there.
Signs it is time to call us
Most of these jobs start with one of a few familiar situations. If any of this sounds like you, we can help:
- A brand-new TV still in the box, and no confidence the wall will actually hold it.
- An existing mount that sags, tilts, or has started pulling away from the drywall.
- Cords hanging down the wall below the screen that you want gone for good.
- A plan to put a TV over the fireplace, but no idea how to get power and HDMI up there cleanly.
- Flat-pack boxes — a dresser, a bed, a media console — stacked in the garage since the delivery truck left.
- Tall furniture in a home with kids or renters that needs anchoring so it cannot tip.
- A vacation rental that needs screens mounted in every bedroom and everything guest-ready before the next check-in.
TV mounting done right on any wall
Walls are not all framed the same, and the wrong hardware is how televisions end up on the floor. We find the real studs, confirm them, and match the anchor to what is actually behind your drywall.
- Wood studs: the gold standard. We lag the bracket straight into framing so it carries the full weight with room to spare.
- Metal studs: common in newer coastal builds and condos, these need toggle-style anchors rated for the load rather than standard lag bolts.
- Concrete block: plenty of first-floor and exterior 30A walls are block behind the drywall, so we set masonry sleeve anchors that bite into the block itself.
- Tile and stone: fireplace surrounds and accent walls call for the right bit, slow careful drilling to avoid cracking a tile, and anchors seated in the substrate.
Big screens and full-motion arms put serious leverage on a wall, so we never trust drywall anchors alone for anything heavy. When the studs do not fall where you want the TV, we add solid blocking so the mount lands on something that holds.
Over the fireplace and cords out of sight
Mounting above a fireplace is our most-requested job and the most particular. We set the height so you are not craning your neck, work around the mantel with a tilting or pull-down bracket when it helps the viewing angle, and keep the screen clear of direct heat. For the cords, there are two clean routes and we pick based on your wall:
- In-wall concealment: on a hollow drywall wall we run the HDMI and low-voltage lines inside the wall and add a code-friendly recessed power kit, so nothing shows at all.
- Surface raceway: on tile, block, or shiplap where fishing wire is not an option, we run a slim raceway and paint it to blend into the wall color.
Either way the result looks intentional instead of improvised. If an old bracket leaves damage behind, our drywall patching and texture matching makes the holes disappear, and when you want a fresh outlet placed behind the screen, our outlet and switch installs take care of the power.
Furniture, beds, grills, and outdoor sets
Flat-pack furniture eats an afternoon and leaves you with a bag of mystery screws. We build it fast and square:
- Dressers, bookcases, media consoles, and desks, assembled and anchored to the wall so they cannot tip onto a child.
- Platform beds, bunk beds, and headboards tightened so nothing squeaks or racks side to side.
- Patio dining sets, sectionals, and porch rockers for the deck and pool area.
- Gas grills built, leak-checked at the propane fitting, and ready to fire up.
Adding a porch fan to the same trip is easy, since we also handle ceiling fan and light fixture installation throughout the house.
Our TV mounting and assembly process
Every visit runs the same tidy way, whether it is one bedroom TV or a whole house of screens and furniture:
- Free estimate and plan. We confirm your TV size and weight, the mount you have or need, exactly where you want it, and what is behind the wall, then give you one clear price with nothing added later.
- Find the structure. We locate and verify the real studs, blocking, or block behind the finish, and add solid backing when the framing does not land where the screen should go.
- Mount and level. We fasten the bracket into structure with the correct anchor for that wall, hang the screen, and confirm it is dead level in both directions.
- Conceal the cords. We route the cables in-wall with a recessed power kit, or into a paint-matched raceway, so nothing dangles below the TV.
- Assemble and anchor. We build the flat-pack furniture square and tight, then strap tall pieces to the wall for safety.
- Test and clean up. We power everything on, confirm the picture and the fit, then haul off the boxes and packing so you are left with a finished room, not a pile of cardboard.
Built for 30A homes and rentals
Coastal construction changes the work. Block first floors, impact windows framed into unusual stud layouts, and covered porches wired for outdoor TVs all show up here in ways they rarely do inland. On porches and lanais we use corrosion-resistant coated hardware and weather-rated mounts so salt air does not eat the bracket in a single season.
In Gulf Place and other condo and townhome communities, we work within HOA rules and treat shared walls and finishes with care. Across rental-dense Seacrest Beach, we mount screens in every bedroom and anchor the dressers for guest safety, then clear out before the next check-in. Not sure how to vet a pro for this kind of work? Our rundown of the questions to ask before hiring a handyman on 30A is a smart first read, and property managers can roll mounting and assembly into a rental turnover checklist.
What affects the price
You get a clear number up front, with nothing tacked on after. A handful of factors move it:
- TV size and weight: a 55-inch bedroom set is quick, while an 85-inch screen needs two people and heavier anchoring.
- Mount type: a fixed low-profile bracket installs faster than a full-motion articulating arm with more hardware to dial in.
- Wall material: drywall over wood is the fastest, while tile, stone, and block take longer and need special bits.
- Cord concealment: a paint-matched raceway is economical, and full in-wall concealment with a recessed power kit is more involved.
- Height and spot: over-fireplace and tall great-room walls need extra setup and sometimes a lift.
- Number of items: bundling several TVs, furniture builds, and a grill into one visit beats paying for separate trips.
Most single-TV mounts sit at the affordable end, and the total climbs from there with cord concealment, difficult walls, or a stack of assembly. Either way, you approve the price before we lift a drill.
Why homeowners pick 30A Home Fixology
We are not a national install service that sends whoever is closest that afternoon. We are a locally owned, family-run crew based right here in Santa Rosa Beach. Owner Jeff Rogers works alongside his son and a small, trusted team, and mounting and assembly is careful, everyday work for us, not a rushed add-on.
- 41 five-star Google reviews from 30A neighbors and rental owners who trusted us with their homes and had us back.
- Licensed and insured, so a heavy screen going up over your fireplace is our responsibility to get right, not your risk to carry.
- Coastal know-how: we understand block first floors, metal studs in condos, and the corrosion-resistant hardware a covered-porch TV actually needs.
- Remote-owner friendly: for second-home and investment owners, we send photo updates so you can see the finished mount and tidy room without flying in.
- Our guarantee: if you are not happy with the result, we come back and make it right, whether you are standing there or a thousand miles away.
Where we serve
We mount TVs and build furniture across Scenic 30A and South Walton, from Dune Allen on the west end to Inlet Beach on the east. Along the way that includes the newer luxury builds around WaterSound, the walkable village of Seaside, and the cottages and carriage homes of Rosemary Beach, plus WaterColor, Grayton Beach, Blue Mountain Beach, and everywhere in between. Wherever your home sits along the coast, the same crew and the same care show up at your door.
Ready to get that screen level and the boxes off the garage floor? Call 30A Home Fixology at (877) 753-5021 for a free estimate. We will mount the TV, hide the cords, and build the furniture in one tidy visit, anywhere along 30A and South Walton.
